24Hour Ready to Assist
24H Ready to Assist
configuration
Pneumatic components: SMC
Photoelectric Sensors: Keyence/Panasonic
Touch Screen: WEINVIEW
PLC System: Mitsubishi
CCD Detection: Keyence/Cognex
Servo Moto: Taiwan Delta
Parameters
| Power | Voltage | Air pressure | Capacity | Pass rate |
|---|---|---|---|---|
| 5KW | 220V/380 V, 50 Hz | Clean compressed air 0.5 – 0.6 Mpa | 5000-5500pcs/h | ≥99% |
| Equipment size | Floor area | Operators required | One- time quantity of assembly |
|---|---|---|---|
| 4m*5.7m | about 22.8m² | 1 person | 6 pcs |
Frequently Asked Questions
With so many years of experience in medical automation machines, we know that the following are questions that customers often ask, you can check the answers below. If you have any other questions, please feel free to contact us and we will respond to you quickly.
Normally, the production capacity of drip chamber assembly is 6000pcs/hour with one worker.
If the dimension of the spike and drip chamber are the same, the machine is able to produce two type of products, air-vented spike and drip chamber and non-vented spike and drip chamber.
For drip chamber, there are 6 channels, it can produce 6 pieces at one time.
For infusion set, there are 10 channels, it can produce 10 pieces at one time.
Normally it will take approx. 120 days to complete production after receiving advance payment.
Yes, we are able to provide customized drawing for your exist workshop layout.
Yes, our machines are equipped with the following testing processes, leakage testing, blockage testing, pullout testing, CCD visual inspection,etc.
Yes, it will automatically remove defective products, and stop the subsequent assembly process, effectively reduce the waste of raw materials and components.
Step 1.
Client :send products inquiry to supplier, including product details, photos, dimensions, workshop layout if available, and other requirements.
Supplier:send the quotation and make proposal for the project.
Step 2.
Client: After prices and details are confirmed, send the samples and components of the products to the supplier.
Supplier: Prepare the design drawing according to the samples and components for the machines, and send to client until the drawings have been confirmed by client. Then send sales contract and proforma invoice to client.
Step 3.
Client:Visit supplier’s factory if needed, and arrange the advance payment as stated in the sales contract.
Supplier:Start production and finish production within the agreed time, complete installation and debugging work in the factory before delivering, then inform the client.
Step 4.
Client: Arrange the balance payment as stated in the sales contract.
Supplier: Arrange the delivery to the loading port of destination port as stated in the sales contract.
Step 5.
Client: Inform the supplier when the machines arrived at the factory, inform the estimated date of installation required, and assist to apply visa for engineers and technicians from supplier if needed.
Supplier: Send the engineers and technicians to client’s factory to giving on-site installation and debugging assistance. Trial operation one week and ensure that the machines are in a normal operating condition.
Step 6.
Client: Confirm and sign on the acceptance report, arrange the balance payment as stated in the sales contract.
Supplier: Give technical guidance and personnel training at client’s factory, including drawing, process, operation, equipment maintenance, equipment performance and problem solving. Provide the after-sale service as stated in the sales contract.
We provide free repair,maintenance and technical support services within one year after equipment debugging qualified when clients in the normal use condition.
We stock quick-wear parts in our warehouse all year long, we will send quick-wear pars to you by express timely.
We will arrange on-site training for our customers, provide guidance on how to solve common faults.
When the machine cannot operate normally, we will provide online assistance immediately.